Midmark 230 Procedure Chair

What’s included?

1. Refurbished Midmark 230 procedure chair
2. Your choice of upholstery color (up to five samples of your choice will be mailed to you)
3. Hand control (foot control optional)
4. 6-month warranty

Specifications

Patient Weight (maximum): 450 lbs (204.1 kg)

Paper Roll (maximum size): 18 in. long x 3.5 in. diameter
(45.7 x 8.9 cm)

Weight of Chair:

230 (w/standard base): 455 lbs (206.4 kg)
w/packaging & skid: 510 lbs (231.3 kg)

230 (w/rotational base): 540 lbs (244.9 kg)
w/packaging & skid: 600 lbs (271.1 kg)

Power Cord: 8 ft. (243.8 cm) long

Electrical Requirements: [See Compliance Charts]

Foot Control Voltage: 10 VAC, SELV (Safety Extra Low Voltage)

Duplex Receptacle (optional)
maximum load: 115 VAC, 3A, 50/60 Hz

Fuses:

Located at power cord inlet:
F1 & F2 6.3 A, 250V, Type T, 5 x 20 mm
Duty Cycle
(motor run time): Intermittent Operation
[30 seconds ON / 5 minutes OFF] Classifications: Class 1, Type B Applied Part
Protection against ingress of fluids:
Foot Control only:
Ordinary Equipment
IPX1
Regulatory Compliance: [See Compliance Chart]

Features

This table includes some of the Ritter 230 Procedure Chair’s positions

Healthcare workers are among one of the most at-risk professions in the US for musculoskeletal injuries. In fact, healthcare workers are almost three times as likely to suffer from work-related injuries than construction workers. Reaching and straining during lengthy procedures can lead to fatigue injuries.

Chair movement should give caregivers a clear view of the procedure site while allowing them to work from an ergonomically correct position whether
seated or standing.

Knee-chest: Tool-less reconfigure of the foot support provides the perfect position for lower body exams and procedures.

Lithotomy: Extending the stirrups and treatment pan, lowering the foot support and tilting the seat provide the perfect position for lower body exams and procedures.

Flat: The table supports exams and procedures requiring supine, prone, left lateral or right lateral positioning.

Low Entry: With the increasing number of elderly and disabled patients, the low entry position is designed to make it easy and safe for the patient to get on and off the table.

Trendelenburg: Whether better positioning for the patient, treating for shock or faintness, or increasing anesthesia onset, the Trendelenburg position offers a full 30° of tilt.

[table “” not found /]

Specifications

Ritter 230 Procedure Chair Specifications

Accessories

Arms/Armboards

• Articulating Armboard 9A81 003-10308-99
• Adjustable Arm System (9A328001, 9A328002 / 9A350003) 003-10405-99
• Spline Brackets for Adjustable Arm System (9A350002) 003-1429-00
• Fixed Armboard 9A179 003-10312-99
• Hand Surgery Armboard 9A82 003-10309-99

Base/Side Rails

• Side Security Panels 9A157 003-10310-99

Casters

• Caster Base 9A330 003-1427-00
• Casters 9A365 003-1651-00

Hand/Foot Controls

• Foot Control: Disc-style 9A370/Linear-style 9A371 003-1441-00

Headrests/Footrests

• Contoured Headrest 9A332/9A339 003-1408-00
• Facial Pad 9A51001 003-10401-99
• Oversized Headrests 9A338/9A342/9A343 003-1459-00
• Oversized Headrest 9A331001 003-10398-99
• Oversized Footrests 9A341/9A344/9A345 003-1504-00
• Oversized Footrest 9A337001 003-10399-99
• Special Procedures Headrest 9A199 003-0940-00

Install Assist Tool

• Install Assist Tool 9A680 Quick Reference Guide 003-2557-99

Instrument Tray

• Instrument Tray – Double Arm 9A267 003-10314-99

IV Pole

• IV Pole 9A77 003-10313-99

Knee Crutches/Brackets

• Standard/Articulating 9A410/9A411/9A412 003-10286-99

Light Brackets

• Ritter 253 Light 9A457 Base Rail Mount System 003-2183-00

Security Straps

• Security Straps 9A214 003-10394-99

Swing Arm Instrument Tray/PC Work Shelf

• Swing Arm Instrument Tray/PC Work Shelf 9A427 / 9A428 003-10404-99

Urology Drain

• Factory Installed 9A329003 003-10331-99
• Field Installed 9A329004 003-10330-99

Vision Block Screen

• Vision Block Screen 9A78 003-0935-00

Literature

Midmark 230 Brochure

Upholstery Color Palette